Residential

Shared Solar, Smarter Living: A Custom 31kW Solar & Battery Solution for Six Apartments

Shared Solar, Smarter Living | Perfect Solar Power

"Shared Solar, Smarter Living: A Custom 31kW Solar & Battery Solution for Six Apartments"

What the owners needed.

Balgowlah, Northern Beaches | One Building. Six Apartments. One Shared Solar Solution.

  • Location: Balgowlah, Northern Beaches, Sydney
  • Project: Multi-residential solar and battery installation
  • Technology: Allume SolShare 2 | Sigenergy | AIKO Solar

Installing solar on an apartment building presents challenges that simply don’t exist with a traditional residential installation. Different electricity meters, varying electrical supplies, shared infrastructure and limited roof space can make accessing solar energy difficult for apartment owners.

For this six-apartment building in Balgowlah, the owners had a clear objective: maximise the building’s solar generation potential, reduce reliance on the electricity grid and make renewable energy available to every apartment.

Perfect Solar Power was engaged to design and deliver a comprehensive solar and battery solution using Allume’s innovative SolShare 2 technology.

The result is a highly customised installation that combines premium solar technology, substantial battery storage and a purpose-built steel mounting structure to make the most of every available section of roof.

The System at a Glance

  • Solar array: Approximately 31kW of AIKO Neostar 3 solar modules
  • Inverter: 20kW Sigenergy three-phase Energy Controller
  • Battery storage: Approximately 48kWh of Sigenergy SigenStor battery capacity
  • Energy sharing: Allume SolShare 2
  • Properties supplied: Six apartments plus common-area electricity loads
  • Electrical configuration: Three apartments with three-phase supply, three with single-phase supply, plus a three-phase house supply

The Challenge: Making Every Square Metre Count

The owners wanted to achieve the highest practical level of energy independence for the building. This meant designing a system that could generate as much electricity as possible from the available roof space while accommodating six individually metered apartments.

The roof itself presented two very different installation challenges.

One section featured a Klip-Lok metal roof, allowing the solar modules to be mounted directly to the existing roof profile using a conventional mounting system.

The second section was considerably more complicated. To achieve the desired solar capacity, a completely new, engineered steel mounting structure was required. This structure needed to accommodate the solar modules within the building’s existing roof geometry while meeting the structural and installation requirements.

Every measurement mattered. The position, spacing and alignment of the steelwork needed to be carefully coordinated with the solar panel layout to maximise generation without compromising the integrity of the installation.

A Collaborative Approach to a Complex Design

One of the apartment owners, a retired builder, took on the challenge of constructing the custom steel mounting structure.

Working closely with him, the Perfect Solar Power team provided detailed guidance on the solar layout, mounting requirements and critical dimensions. This was a genuinely collaborative process, with measurements and design details refined down to the millimetre.

The finished structure allowed us to utilise roof space that would otherwise have been difficult to accommodate with conventional solar mounting methods. It was a great example of what can be achieved when practical building experience and specialist solar design expertise come together.

The resulting installation makes excellent use of the building’s roof area, with the custom structure and conventional roof-mounted array working together as one integrated solar generation system.

Shared solar panels on a multi-storey apartment building

The Technology: Sharing Solar Across Six Apartments

Traditionally, installing solar on an apartment building has been difficult because each apartment has its own electricity meter and supply arrangement.

The Allume SolShare 2 system addresses this challenge by enabling electricity generated from a central solar installation to be distributed between multiple individually metered apartments. Rather than requiring six separate solar systems, SolShare allows the building to benefit from one larger, centrally managed installation.

For this project, the electrical configuration added another layer of complexity:

  • Three apartments operate on three-phase electricity.
  • Three apartments operate on single-phase electricity.
  • The building’s common-area electricity supply is also three-phase.

The system was designed to accommodate these different supply arrangements while providing shared access to the solar energy generated on the roof.

Solar Generation and Battery Storage Working Together

The solar installation is paired with a 20kW Sigenergy Energy Controller and approximately 48kWh of battery storage.

The battery system provides the ability to store surplus solar energy generated during daylight hours for use when solar production falls, helping increase the building’s overall solar self-consumption.

Combined with SolShare 2, the system is designed to make better use of the electricity generated on-site rather than relying solely on daytime consumption or exporting surplus energy to the grid. This approach supports the owners’ original goal of achieving greater energy independence across the entire building.

The Outcome: A Building Designed for Greater Energy Independence

The completed installation has transformed the building’s available roof space into a substantial renewable energy asset.

By combining a large solar array, battery storage and shared solar distribution technology, the owners have invested in a solution designed to deliver long-term benefits across all six apartments.

The key outcomes include

  • Maximised solar generation capacity from a challenging roof layout.
  • Shared access to solar energy across six individually metered apartments.
  • Battery storage to increase the use of locally generated renewable electricity.
  • Integration of the building’s common-area electricity loads.
  • Reduced dependence on grid-supplied electricity.
  • A custom-engineered mounting solution that made the project possible.

 

Most importantly, the owners are extremely happy with the completed installation and the initial results.

For Perfect Solar Power, this project demonstrates that complex roof layouts and multi-apartment electrical configurations don’t have to prevent buildings from benefiting from solar and battery storage.

Making Solar Possible for More Apartment Buildings

Apartment buildings represent an enormous opportunity for renewable energy, but they require a different approach from traditional residential solar.

With the right design, technology and installation expertise, a single solar and battery system can deliver benefits across multiple households.

At Perfect Solar Power, we specialise in finding practical solutions to complex energy challenges, whether that’s a difficult roof, an unusual electrical configuration or a large-scale standalone power system.

Every building is different. The right solar solution starts with understanding what’s possible.

Talk to us about solar and battery storage for your apartment building. Book a free consultation →

Contact us background image

Make the best decision for your solar investment.

From Freshie to Fiji, tell us about your project. One of our engineers will review it and be in touch. No pushy sales tactics, no pressure.